What To Consider Before Hiring An Excavation Contractor

What To Consider Before Hiring An Excavation Contractor

Hiring an excavation contractor is a huge step towards constructing your dream house. Excavation contractors are very important on the onset of a construction project. They help prepare the project site, by clearing vegetation and demolishing existing structures. Then, they excavate the foundation of the building.

Before finding an excavation contractor near you, there are preparations needed. Consider the following;

Get the project drawings approved

Before any construction work can begin, you need to get a building permit. Different states and cities have different requirements for issuing building permits. Generally, the process involves taking the project drawings to the Department of Buildings. You, the homeowner, or the building contractor fill in the appropriate forms and return them with the necessary fees. The project can be approved or changes requested. That is why it is important not to commence any construction work, including excavation before the permit is issued.

Note that the excavating contractor will use the project drawing to mark the site for excavation. They need to work with the approved drawing. If they worked with unapproved drawings that later get rejected or changed, time and money will have been wasted.

Prepare routes for the excavating machinery

A small building project that requires digging holes for several deck piers demands small excavating tools such as crowbars. Actually, you can DIY deck piers excavations. But big construction projects will demand heavy machines such as back hoes and bull dozers. These machines occupy big spaces. Therefore, you need to prepare routes they will use to access the project site. You do not want the fork of the back hoe to destroy your beautiful specimen trees.

Mark routes for these machines with stakes. It also helps to fence areas that are off bounds using ropes or clotheslines. If there are tree branches protruding on the access routes you have prepared, tie them back.

Locate underground utility lines

Utility lines are some of the possible obstructions in an area that is to be excavated. You should be particularly keen to know where the gas lines are located. In most areas, telephone lines, internet cables, water pipes, and even electricity cables are buried. An excavating contractor that is good at their job will locate these possible obstructions. But, to be sure, check them yourself before the contractor arrives. You do not want to imagine if the blade of a bulldozer punctured a gas line or a water supply pipe.

The best way to approach this task is calling the utility supplier. They will send a technician to locate and help you mark underground lines. Remember to also locate any septic tanks and dry wells on the project site.

Arrange for the relocation of dirt

After the excavation is complete, what will happen to the excavated material? Relocation of dirt is a major concern, especially in the case of a small fully landscaped construction area. The excavation contractor will have to come with a dump truck and a bucket loader. This extra equipment will cost you more, and the relocation means that the excavation will take more time. On a large site, consider relocating the dirt on your property. Make proper arrangements because even a small construction project will produce a lot of dirt.

Look for depressions in the project site that would be more useful if they were level ground. If it is good soil, you can make arrangements to sell it to landscapers. Also, you can give it for free to other gardeners in your neighborhood. If you have any landscaping plans yourself, keep the dirt and use to create berms, raised beds, and even use it for potting plants. Remember, some of the soil will be used as backfill.

Consider the weather

The best time to carry out excavation work is when there is dry weather. Excavation equipment works efficiently on firm ground. Nonetheless, it will not always be practical to wait until the weather is conducive. Prepare the ground for the heavy machines by forming tracks with scaffolding planks. The idea here is to evenly distribute the load on the wheels of excavation machinery so that they will not form deep ruts and trenches on the wet ground. You can also form temporary routes for the machinery by spreading a layer of crushed stone on the ground.

Where to find excavation contractors

Now you know what to do before hiring an excavation contractor. You can now proceed to the hiring process. This process begins by you finding excavation contractors that operate in your neighborhood. We can help you do that. Open this page and click on your state. Then, select your county, and you will open a list of excavation contractors in your area. Your project can’t wait forever…start searching now!