Tile flooring, back splashes and bathroom areas are beautiful to have. They can be difficult to install yourself, however. If you find a spot in your home that you’d like to have tiles on, then make sure to check out all that is provided through a tile contractor. Not only can they see your vision, find the perfect tiles for it and install them but they take their time to make sure that all their clients are happy. Obtain a quote from a tile contractor in your area, so you can have the beautiful tile appeal that you’ve been searching for.

Today, tile contractors are needed for more than just bathroom and kitchen renovations. With so many types of tile available on the modern market, more homeowners are choosing tile flooring in living spaces, tile accent walls, and other unique designs that help their homes stand out.

So, what should you do if you need tile to be installed in a kitchen, bathroom, or any other living space? Your first step should be to find a licensed, certified and qualified tile contractor. Tile contractors specialize in working with tiles of all types, so they can guarantee the best results.

Looking for tile contractors in your area? Contractors Today is here to help. Read on below to learn more about tile contractors, different types of tile projects, and much more. Ready to get started? With our simple online form, you can find licensed and qualified contractors in just minutes.


Licensing And Certification Requirements For Tile Contractors

The precise requirements for licensing for tile contractors vary state-by-state. Some states, like California, have a specific Ceramic and Mosaic Tile Contractor license, which requires the contractor to have multiple years of experience, pass a test, and meet other such requirements.

However, in some other states, there is no need for a tile installer to have a license, though they will usually need a more general contractor’s license. We recommend contacting your state or local licensing board to learn more about the requirements for tile contractors in your area. This will help you make a more informed decision when it’s time to choose a professional for your project.

For additional peace of mind and to guarantee great results you should also look for a tile installer who is certified by a governing body like the Ceramic Tile Education Foundation (CTEF) and is a member of the National Tile Contractors Association (NTCA).

As always, you should also make sure that your tile contractor is bonded and insured. This means they carry insurance policies that protect you from legal liability if something goes wrong on the job – and that you can be reimbursed if the project is not completed properly (or at all), or if damage is done to your property during the project.

What Does A Tile Contractor Do? Understanding The Tile Installation Process

Wondering what tile contractors do, and what’s involved in the tile installation process? While each contractor may have a slightly different approach to the job, the following steps are almost always involved in installing a new tile floor or wall – no matter where it is in your home.

  • Get a project estimate and choose your tile products – First, you’ll work with your tile contractor to get a project estimate for your home, based on the square footage you’re covering, the preparation steps required, and other such factors. You’ll also choose the tile product and pattern that you’d like to be installed.
  • Prepare the wall or floor – If you have a cement subfloor, any existing flooring must first be removed, and the subfloor must be cleaned to remove any adhesive, dirt, dust and other debris. Other types of subfloor, like plywood, will require the installation of cement backing board.For a wall, the process is similar. Most tile can be applied to painted/unpainted drywall, as well as plaster and textured walls. In some cases, though, it may be necessary to apply cement backing board to prepare the wall, or to install new moisture-resistant drywall (in bathrooms, particularly).
  • Spread mortar – Once the wall or floor has been prepared and your tile contractor has finalized the layout, the process of placing your tiles will begin. They will spread a special type of thinset mortar or tile adhesive on the floor, in preparation for the placement of your tiles.
  • Cut and place tiles – Next, your tile contractor will begin placing each tile, one-by-one, using the guide and layout that they have designed. Spacers and other tools will be used to ensure the proper distance between each tile, and it may be necessary to cut some tiles to fit, depending on the size of the tile and the size of your room. Depending on the size and complexity of your project, this process could take just a few hours or several days.
  • Allow tiles to cure & finish with grout – Once all of the tiles have been placed, they must cure and bond to the mortar or adhesive. This usually takes at least 24 hours. Once the adhesive has cured, it’s time to apply the grout. Grout is used to ensure that your tiles maintain even spacing, and for sealing the joints to provide water resistance. It’s applied in a thin, even layer between each tile.
  • Cleanup & finishing – Once the grout has been placed, all that’s left is to clean up the area, and polish the tile. Then, the project is complete.

Again, the process could vary slightly based on your needs and your contractor, but most tile installation projects will consist of these basic steps, so this is a helpful overview for helping you understand the responsibilities of tile contractors.

Why Choose Tile For Flooring & Walls? Understanding The Benefits

Not sure if tile is right for you? Thinking about choosing an alternative material like hardwood, engineered wood, or vinyl plank? Here are a few reasons that tile may be the best option for your home improvement project.

  • Non-porous & water-resistant – Tile is completely water-resistant, and will not absorb water. This makes it ideal for areas of your home that may be frequently exposed to water, including entryways, hallways, bathrooms, kitchens, utility/mudrooms and more.
  • Easy to clean with minimal maintenance – Tile is very easy to clean. Usually, all you need to do is use a mild detergent and a mop or rag to wipe up spills. Due to its hard, nonporous surface, it’s incredibly difficult to stain. If you’re looking for a material that requires minimal maintenance, tile is a great option.
  • Very durable – Tile is resistant to staining, scratching and damage. In addition, most modern tile products are very resistant to shattering, even when impacted by heavy objects. Compared to other materials like vinyl and hardwood, tile is more durable and requires less frequent refinishing/replacement.
  • Enormous variety of styles and materials – There are both natural and man-made tiles available, and they are available in a huge variety of materials. Whether you want bright, abstract tiles, tiles that imitate the look of wood or stone, or natural stone tile, there’s a product out there that’s right for you.

Thanks to these benefits, tile may just be the right choice for your project. We recommend getting in touch with a tile contractor near you for a quote. They can help you understand the cost of your project, and compare different types of materials to determine what the best option is for you and your property.

Find Qualified Tile Contractors Near You – Get Started With Contractors Today Now!

At Contractors Today, we’re always here to help if you need to find contractors for your home improvement project – and that includes tile contractors. To get started, just visit our website and give us a little bit of information about your project, your location and the services you need. Then, in just a few minutes, we can help you find qualified candidates, set up consultations, and get a quote for your project. It’s just that easy – so get started now.

Tile Contractors Information

FREE quote from licensed tile contractors

Look at Contractors Today to find the tile contractors that can come out and do the job you’d like to have done.